Payment Type: | L/C,T/T,Cash |
---|---|
Min. Order: | 1 Set/Sets |
Delivery Time: | 60 Days |
Model No.: ZGM-ridge
Technical Datas roll forming machine | |||
1 | Material width | As your requests | |
2 | The effective width | As your regards | |
3 | The thickness of Coil | 0.4—0.8mm | |
4 | Application | wall sheet and roof sheet | |
5 | The overall dimensions | 6800mmX1500mmX1300mm | |
6 | Total weight | 5 Tons | |
7 | Main Power | 5.5 KW | |
8 | Uncoiler | Manual Uncoiler | |
9 | Inner diameter | 508--610mm | |
10 | Outer diameter | 1200mm | |
11 | Loading weight | 3T | |
12 | Forming speed | 5—8m/min | |
13 | Forming steps | 12 or more stations | |
14 | Bracket | welded with 36 # I-steel | |
15 | Material of Shafts | 45# steel with rough finished and then refined finished | |
16 | Diameter of the Roll | 76mm | |
17 | Material of Rolls | high quality 45#steel coated with hard chromium 0.05mm | |
18 | Processing Technology | rough processing ---refined processing--Hard Chromium Plating. | |
19 | Material of Rack | complete welded structure of A3 steel plate 16mm thickness | |
20 | Transmission | Transmitted by the chain-bracket | |
21 | Material of Chain | 45#steel with heat treatment of HRC45-50° | |
22 | Holders under chain for lubricant | By the machine | |
23 | Material of cutting blade | Cr12 with quenched treatment 60-62 |
Main Accessories | ||
1 | Decoiler(manual or hydraulic for options) | 1 set |
2 | Main Forming Machine | 1 set |
3 | Correction System | 1 set |
4 | Hydraulic Station | 1 set |
5 | Auto-Cutting Knife | 1 set |
6 | PLC Control System | 1 set |
7 | Run Out Table | 1 set |
Work Process |
Passive Decoiler → Flattener → Front Material Store → Intermission Feeder → Punching → Rear Material Store → Guiding → Roll Forming → Profile Rectifying → Measure and Cut → Runout Table |
Product Categories : Roof&wall roll forming machine > Ridge cap roll forming machine