|Min. Order:||1 Bag/Bags|
|Productivity:||40sets Per Month|
|Place of Origin:||China Hebei|
|Supply Ability:||40sets Per Month|
Model No.: bottom shutter door
For our roll forming machine,it is customized design.Different designs can be cusotmized as your request.If you are interested in our machine.
We would ask you some questions first.
1) Do you have an idea design you need?Including measurement.If pls tell me where are you from.So we can send you some popular designs at your place.
2) What is material thickness u use?Max and Min?
3) What is hardness of material?Is it standard?Or full hard?
4) What is voltage of machine u need?380V,50HZ?220V,60HZ?OR 415v,50HZ?We can make is as your request.
Maybe you have some concern about our machine.
1.Profile of shutter door design:
2.Working process of rolling up door forming machine
Capacity: 3 tons
Material: #45 steel quenched
Power:2.2KW,03 Phase, 220/380V, 50HZ/60HZ
Method of open and close of segments: manual
Number of segments:4 pieces
Range of segment expansion: ø480- ø520
Inner diameter of coil: ø508
Maximum outer diameter of coil: ø1,300
Feeding speed:25m/min(transducer control)
Rollers material: CR 15, HRC 60. Chrome coated: 0.03-0.05mm, Strength (MPA): 70 tons, 800 MPA
Shaft: diameter 55mm, material is #45 steel. Quenched hot treatment. Strength of the main shaft (MPA): 70 tons, 650MPA
Bearing brand: FAG Germany
Main motor: 11KW, 380/220V, 50/60HZ, 3 Phases (Siemens Brand),Two motors
Transmission by gear
Station material: cast steel
Machine is equipped with cooling system
Touch screen brand: Delta
PLC brand: Siemens
Inverter brand: Siemens
Main components for low pressure electricity: Schneider Germany
Sensor: Balluff B+F brand
Control motion/production process: Un-Coiler---12 stations Roll Forming Machine---Hydraulic cutting by servo---output table
Cutting type: hydraulic cutting with servo motor
The material of knives: CR12MOV; heat treatment HRC 55-60, Quenched; the Strength in MPA: 950
Servo motor: 1.5KW, 220V
Tolerance of length: ±0.5mm
Action: the host does not stop, servo track to cut off
Hydraulic Motor: 5.5KW, 220V/380V, 50HZ/60HZ, 3 Phases, Siemens brand
Hydraulic pump: Yuken brand Taiwan
Hydraulic valve: Rexroth Germany
Hydraulic cylinder: China
The Hydraulic station have Accumulator
The stations have 1 valves
Length: 6 meters
Drive type: rollers
Material: galvanized sheet
Galvanized steel: 1.0-1.3mm
Roll forming machine space: 8.7m*1.55m*1.36m
15-18m/min (including cutting)
Bearing in main shaft: 20 pcs
Other bearing (sub-rollers): a few
Limit switch:2 pcs
Low pressure electricity: a few
Oil tube: 2 pcs for each tool
Connector: a few
Cutting knives: 2 extra
Upper shaft and down shaft: 2 pieces
Station: 1 pieces
Gear: 2 pieces
Botou Golden Integrity roll forming machine Factory is located in "the town of casting molds", enjoying convenient and highly effective transportation for being close to Tianjin Port, No.104 National Way, No.106 National Way and Jingjiu Railway.
Our technical force is abundant. Production equipment is advanced, detection means is complete.
We specialize in the professional production of various types of roll forming machines, and the development and production of fully automatic intelligent control roll forming machines of C-shaped steel and dust collector anode plates, and Other equipment. On the basis of traditional roll forming machines, we also develop new computer fully automatic roll forming machines, roof and wall panel forming machines, glazed tile forming machines, floor bearing plate forming machines, high-speed barrier devices, double color steel tile molding machines, C and Z steel machines, arch appliances, sandwich composite plate machines, shearing machines, bending machines, and heat insulation sandwich composite machines. Our products have reached the advanced level in the same industry.
As beautiful appearance, reasonable structure, and tile-based standards of our products, they are popular among new and old customers. Products are sold to domestic enterprises.
Our factory has highly qualified and experienced professionals and highly skilled construction workers to serve you. Our factory can design and produce various kinds of special-shaped cold-formed molding equipment for different needs of the users. You are welcome to contact us for more information.